Bard Multi-class - Downloaded from the Wizards Community, all coding removed by Solauren

Bard Multi-class

Post/Author/DateTime Post
#1
Aaron_Highcolor
Apr 22, 2009 17:42:35 Why is it when I take Acolyte MC feat (from bard to warlock or wizard), it allows me to pick a utility BARD power (when it should be warlock or wizard)?

Also, can a bard take novice MC feat for each class, or only 1?
#2
Forgarn
Apr 23, 2009 14:52:50 I assume that you have taken the Arcane Initiate (Wizard) or the Pact Initiate(Warlock) feat first correct?
#3
mandrake776
Apr 23, 2009 18:20:03 blank
#4
Aaron_Highcolor
Apr 23, 2009 18:36:27
I assume that you have taken the Arcane Initiate (Wizard) or the Pact Initiate(Warlock) feat first correct?

Yes, and when I went to choose the Acolyte MC feat, the only power I could exchange was a bard utility power of a lower level.
#5
Forgarn
Apr 24, 2009 9:03:37 Okay, I just created a half-elf bard and leveled it up to 8th level so I could take that feat. You go to the retraining section of the Build tab and at the bottom you should see the Acolyte Power. Click on it. On the right hand side you will see the two bard utility powers that you can choose to get rid of. Once you make your choice, the right hand side will display the utility powers of your MC that are of the same level or lower than the one you chose. Make your choice and then click on the blue take element button. Green check marks will appear beside both powers and your MC choice will appear in the bottom beside the Acolyte Power feat name.

It appears to be working fine for me.

Post/Author/DateTime	Post
#1 Aaron_Highcolor Apr 22, 2009 17:42:35	Why is it when I take Acolyte MC feat (from bard to warlock or wizard), it allows me to pick a utility BARD power (when it should be warlock or wizard)? Also, can a bard take novice MC feat for each class, or only 1?
#2 Forgarn Apr 23, 2009 14:52:50	I assume that you have taken the Arcane Initiate (Wizard) or the Pact Initiate(Warlock) feat first correct?
#3 mandrake776 Apr 23, 2009 18:20:03	blank
#4 Aaron_Highcolor Apr 23, 2009 18:36:27	I assume that you have taken the Arcane Initiate (Wizard) or the Pact Initiate(Warlock) feat first correct? Yes, and when I went to choose the Acolyte MC feat, the only power I could exchange was a bard utility power of a lower level.
#5 Forgarn Apr 24, 2009 9:03:37	Okay, I just created a half-elf bard and leveled it up to 8th level so I could take that feat. You go to the retraining section of the Build tab and at the bottom you should see the Acolyte Power. Click on it. On the right hand side you will see the two bard utility powers that you can choose to get rid of. Once you make your choice, the right hand side will display the utility powers of your MC that are of the same level or lower than the one you chose. Make your choice and then click on the blue take element button. Green check marks will appear beside both powers and your MC choice will appear in the bottom beside the Acolyte Power feat name. It appears to be working fine for me.